2025 ORP Hybrid Build: Peak 1.25" Spacer Lift, Terra Grappler G3 tires, TRD Pro wheels & skid plate, Rotopax, Westcott rack & molle panels

[docxkt]

Here’s the full breakdown of everything I’ve done so far—I think I’m finally done (for now).
• TRD Pro Wheels – $875 (currently 20% off for the 4th)
• TRD Skid Plate – $415 (currently 20% off for the 4th)
• OEM Red Tow Hooks – $120 (currently 20% off for the 4th)
• Westcott Lo-Pro Roof Rack – $1,000
• Westcott Side MOLLE Panels (Driver & Passenger) – $600
• Window Tint – $330
• Peak 1.25” Spacer Lift – $130
• Nitto Terra Grappler G3 (265/70/18) – $1,060 (mounted & balanced)
• Install for Peak Lift + Westcott Rack & Panels – $650
• Alignment – $120

All in, very happy with how it turned out. The 1.25” lift levels it out perfectly, the rack and panels look super clean, and the tires are a nice balance of looks, comfort, and capability.

Did you need the hardware kit to install the skid plates?

Sponsored

 

[pauleighty]

Did you need the hardware kit to install the skid plates?

No, I actually had extra bolts left over after the install. But, if you have an SR5 or Sport you’ll need to buy extra bolts because you won’t have enough

 

[docxkt]

No, I actually had extra bolts left over after the install. But, if you have an SR5 or Sport you’ll need to buy extra bolts because you won’t have enough

Did you change the spare tire also or just the 4 of them? Did you just replace the valve stems and take the old tpms out and place them into the new rims?

 

[pauleighty]

Did you change the spare tire also or just the 4 of them? Did you just replace the valve stems and take the old tpms out and place them into the new rims?

I didn’t change the spare. I had them reuse my TPMS, the car only had like 20 miles on it when I took it in

 

[pauleighty]

Installed the Rotopax mount and 1.75gal fuel container today

 

[docxkt]

Just ordered the TRD Skid plate, TRD Pro wheels and Squadron PRO ditch lights.

 

[pauleighty]

Just ordered the TRD Skid plate, TRD Pro wheels and Squadron PRO ditch lights.

make sure to post some pictures when’s it’s all done!

 

[DangItsDen]

Installed the Rotopax mount and 1.75gal fuel container today

looks great! What center caps did you use? Like these better than the pro ones with the red circle

 

[kzrman]

Installed the Rotopax mount and 1.75gal fuel container today

Do you still have the ARB racks on or did you change them out to be able to do this?

 

[pauleighty]

looks great! What center caps did you use? Like these better than the pro ones with the red circle

thank you! Just the regular TRD center caps, not the Pro ones

 

[pauleighty]

Do you still have the ARB racks on or did you change them out to be able to do this?

Mine didn’t come with the ARB, just the normal rack

 

[docxkt]

Hey were you able to fit the 33’s without the lift without it rubbing prior to putting the spacers in?

Sponsored