Mudguards OEM part number? Aftermarket mud flaps options?

[StickerFab]

Working with Rally Armor to confirm fitments for the 4Runner. Worked with them on the Land Cruiser. They are heavy enough to knock down debris and light enough to give way when you crawl over objects.

They'll be wider than OEM ones.

 

[Jpr18]

I got my pair ordered for $100 from Ourisman Toyota in VA. They just shipped today.

Can you share which part numbers you ordered? I asked my local parts department for a quote and got this:

 

[timelapse]

Can you share which part numbers you ordered? I asked my local parts department for a quote and got this:

Part#: PK389-35S00-TP

https://toyotaparts.ourismantoyotao...toyota-2025-4runner-mudguard-kit-pk38935s00tp

Hopefully the kit has all the included hardware. I’ll let you know once they arrive.

 

[brumey]

Part#: PK389-35S00-TP is the part number I ordered as well. Lets hope its a kit.

The part number is not easy to find in the dealers system, at least, 3 local dealers I called said they could not find it.

 

[timelapse]

Part#: PK389-35S00-TP is the part number I ordered as well. Lets hope its a kit.

The part number is not easy to find in the dealers system, at least, 3 local dealers I called said they could not find it.

The dealer in Virginia I ordered from just posted a photo on their site (from my order). It appears to show all the correct hardware.

 

[JR1]

These OEM mud guards are also on Amazon. $147.00
i ordered them and will report back when I receive them.

 

[brumey]

I paid $102 plus tax and shipping from a Toyota dealer.

Good to know that it will be the complete kit.

 

[ModernDay4Runner]

I paid $102 plus tax and shipping from a Toyota dealer.

Good to know that it will be the complete kit.

that price for all 4? Can you give a contact name or number of the person you dealt with a whatever dealership you dealt with?

 

[timelapse]

that price for all 4? Can you give a contact name or number of the person you dealt with a whatever dealership you dealt with?

Yes, full set. I posted a link above for the same price from a dealer in Virginia. Shipping was $10.

 

[brumey]

I received my mud guards from Ourisman Toyota in VA (They have 3 dealers, the parts Dept is at Richmond, VA). OEM Toyota bus, 4 mud guards and two small packets of screws. The packet has four screws and three spring clips. I have two packets. No instructions.

It may become obvious when I take a look at the car which need screws, clips, etc.

Does anyone have access to instructions or a YouTube video on fitment?

Link to order - https://toyotaparts.ourismantoyotao...MIgJudz_PKjAMVW6BaBR33oB3GEAQYASABEgLObvD_BwE

 

[timelapse]

I received my mud guards from Ourisman Toyota in VA (They have 3 dealers, the parts Dept is at Richmond, VA). OEM Toyota bus, 4 mud guards and two small packets of screws. The packet has four screws and three spring clips. I have two packets. No instructions.

It may become obvious when I take a look at the car which need screws, clips, etc.

Does anyone have access to instructions or a YouTube video on fitment?

My order has been trapped in an unusual USPS delay for the last 4 days. Finally out for delivery today. If you call or email Ourisman parts they might be able to share an install diagram. I’m guessing it’ll be straight forward once you’re looking at the vehicle with parts in hand.

 

[brumey]

I got the Install instruction (attached). I must say, the Ourisman parts staff are great. A Shout out to Ronald who went the extra mile to find the instructions and email them to me.

Its more involved than I thought and does require drilling of two holes.

The included hardware is different to what I first thought after opening each bag. Here is a listing.

Front (1 Bag)

Vehicle Service Parts (may be required for reassembly)

6 #14 x 19mm Screw
2 8mm Push Pin
2 Grommet

Rear (1 Bag)

4 M5 x 20mm Screw
4 M5 Spring Clips

 

[Mad Ghost]

Working with Rally Armor to confirm fitments for the 4Runner. Worked with them on the Land Cruiser. They are heavy enough to knock down debris and light enough to give way when you crawl over objects.

They'll be wider than OEM ones.

I know its only been a week any updates