-
Welcome to MacanEVowners! If you're joining us from Taycanforum.com, then you may already have an account here.
If you were registered on Taycanforum as of January 24, 2024 or earlier, then you can simply login here with the same username and password
If you wish, you can remove your account here.
Sponsored
Regen and acceleration circle not working
- Thread starter CandianPorsche83
- Start date
- Watchers 3
- First Name
- Ron
- Joined
- Dec 30, 2019
- Threads
- 7
- Messages
- 24
- Reaction score
- 21
- Location
- California Central Coast, USA
- Vehicles
- 2026 Macan 4 (on order), 2020 Taycan 4S
Can you maybe attach a photo of the console?
I assume you are well aware of the fact that there are alternate formats for the center tube display that don’t have the green blue augmentation. At least that was the case for the Taycan.
- Joined
- Mar 15, 2019
- Threads
- 13
- Messages
- 422
- Reaction score
- 239
- Location
- Vancouver
- Vehicles
- Porsche 911
- Thread starter
- #3
Yup well aware of the different views. I’ve use this option for about 10 months now so 100% there’s something wrong with it . See attached video.
As I press accelerator pedal usually top right outer ring would turn blue clock wise and as I brake it would turn green counter clock wise. It’s not doing that.
At the same time my HUD is also set to have the “power meter” and I can see it works in the HUD.
A bit odd. Have reset the PCM and also turn off car and walk away trick to no avail.
This combined with rear window opening randomly recently and my rear camera completely blacking out and radar not working last two months it feels like the car is literally malfunctioning by the day lol
Car is booked for service but not until end of January ….
- First Name
- Ron
- Joined
- Dec 30, 2019
- Threads
- 7
- Messages
- 24
- Reaction score
- 21
- Location
- California Central Coast, USA
- Vehicles
- 2026 Macan 4 (on order), 2020 Taycan 4S
@CandianPorsche83 Sigh, I am sorry you are experiencing these issues. The power meter sounds like SW for sure; however, the camera issue can be HW. My 2020 Taycan had several camera issues… I was really hoping Porsche had worked through them by now.
- First Name
- Doc
- Joined
- Dec 4, 2025
- Threads
- 0
- Messages
- 1
- Reaction score
- 2
- Location
- California
- Vehicles
- Macan 4S
With the center tube selected, click the right scroll wheel and an option should pop up that allows you to turn the power meter on or off.
- First Name
- Ron
- Joined
- Dec 30, 2019
- Threads
- 7
- Messages
- 24
- Reaction score
- 21
- Location
- California Central Coast, USA
- Vehicles
- 2026 Macan 4 (on order), 2020 Taycan 4S
I had various camera outages where it just shows the red camera symbol in the park assist display. I had the full surround cameras and sometimes I was missing just a rear or sometimes the two sides or sometimes all four. It took several visits and replacing the harnesses and control units, but they did eventually resolved my problems, and the cameras were rock solid. The problems would not be sticky, if you turn the car off for 15 minutes and back on, they could easily be available again. I felt like it is a timing issue where the camera does not report availability quickly enough. I think it’s software, but that’s only based on 39 years of SW development.
I hope they’re able to resolve your camera issues much quicker than mine and you are again able to enjoy your vehicle.
Sponsored
