Problems with Homelink Pairing to Garage Door Opener?

[pm4s]

it is weird which rolling code did it detect since I am not pressing anything?!

which video specifically?

If you did not press the button on the fob maybe somebody started the configuration for the button but did not complete it, I suggest deleting and starting again.
To delete the button I think you swipe left or right on the screen.
This YouTube video is clear:

Disregard my instructions in previous post, it was from memory when watching those videos in the manual those with the same music and no narrative.

Sponsored

 

[eprokos]

If you did not press the button on the fob maybe somebody started the configuration for the button but did not complete it, I suggest deleting and starting again.
To delete the button I think you swipe left or right on the screen.
This YouTube video is clear:

Disregard my instructions in previous post, it was from memory when watching those videos in the manual those with the same music and no narrative.

I have deleted it many many times
Even tried the II or III button.

Porsche dealer recognized that something was stuck but they refuse/dont know how to solve it

 

[pm4s]

Have you tried holding buttons I & III at the same time for 10-20 seconds? Once it flashes it resets the module, at least it did on the older Porsches.
Next would be a 12v reset, remove the negative 12v terminal, that should sort the PCM if stuck.

 

[eprokos]

Have you tried holding buttons I & III at the same time for 10-20 seconds? Once it flashes it resets the module, at least it did on the older Porsches.
Next would be a 12v reset, remove the negative 12v terminal, that should sort the PCM if stuck.

hmm will try during weekend!! thank you!!

Sponsored