Pre-wired dashcam connector location?

[gregb]

Based on the instruction you will need 2 fuses, one in the footwell and one in the "fuse holder A (front end) (see page 16)". We still haven't located that fuse box, so if you do find it, please share it here! Or share any photos you can take during installation.

Sponsored

 

[craz8]

The instructions seem to imply that the 5amp fuse is for the Porsche rear camera, so that fusebox is in the trunk area. If you have a dashcam that uses the coax for power to the rear camera, you don't need that rear fuse.

I may be wrong on this point though.

 

[Joder]

My guess is that the front end fuse box is in the frunk area.

I posted photos from the front pax footwell and side panel and the rear trunk panels.

https://www.macanevowners.com/forum...n-issues-fuse-box-location.17100/#post-266303

https://www.macanevowners.com/forum...es-fuse-box-location.17100/page-2#post-266670

I'll forever be in search of the front end fuse panel

 

[fubar.droid]

Based on the instruction you will need 2 fuses, one in the footwell and one in the "fuse holder A (front end) (see page 16)". We still haven't located that fuse box, so if you do find it, please share it here! Or share any photos you can take during installation.

Damn, I assumed the pre-wiring meant no need to fuse tap

 

[gregb]

Damn, I assumed the pre-wiring meant no need to fuse tap Sponsored

Prewired means you do not need to fuse tap BUT you do need to add 2 fuses based on the instructions from porsche. The fuses are left empty to disconnect the prewiring from the rest of the car.

 

[fubar.droid]

Prewired means you do not need to fuse tap BUT you do need to add 2 fuses based on the instructions from porsche. The fuses are left empty to disconnect the prewiring from the rest of the car.

Oooh got it, thanks for that clarification. Big difference!

Sponsored