Adaptive Cruise Control Fault

[Diamondtrons]

My innodrive adaptive cruise control is not automatically changing the speed limit and therefore the car speed won’t change even if it recognises the speed signs. This is happening with all the options activated in the Assistance driving settings.
I have emailed my dealership in London. Anybody else with the same issue ?
See attached video:

 

[SuperH]

I had the same issue yesterday. I thought the recent navigation update (and cache clearance) that fixed the traffic sign recognition fault was what was preventing it from working, but since installing that and clearing my cache, the warning message has gone and the cruise control now works, but only in so much as it slows down for the car in front, but not for a change in speed limit sign even though it is picking up the speed limit (generally - I've found several occasions during my 300 mile journey where it was incorrect).

 

[RunningOnSolar]

I think you get standard adaptive until you press the button on the underside of the driver assist stalk. That activates a I’ve lane keeping. My Innodrive features are all working with this setting on. Used them most recently this evening.

 

[SuperH]

I think you get standard adaptive until you press the button on the underside of the driver assist stalk. That activates a I’ve lane keeping. My Innodrive features are all working with this setting on. Used them most recently this evening.

My lane keeping assist is set as on all the time. That works fine. It’s just that when the adaptive cruise control is on, it only slows or accelerates for other cars - not for drops or increases in speed limit

Sponsored