Custom Cubby Organizer (3D Print)

[tmrqs]

In just a few days, I'll be getting mine, I'll provide a review then.
Stay tuned!

 

[SuperH]

Yes.

I’ll let you know how production of mine goes first lol

 

[amy561]

I would love one. Will you be interested in selling me one?

 

[tmrqs]

@cottony was kind enough to print a cubby organizer and then ship it across the country, here’s a little review of his creation.


Looks and dimensions

This little box is 6” wide at the top and 5” 1/4 at the bottom. It’s 7” 1/2 high and just 1” 1/4 deep.

There are 3 storage areas:
- the left/right ones are 1” 5/8 wide at the top and 1” 1/8 at the bottom
- the middle one is 2” 3/8 wide

This version is black, the finish quality is quite good and smooth to the touch while the bottom part is slightly textured. Overall very good!

Installation and use

Installing the organizer requires finding the right angle to slide it from the side opening of the center console. Took me a couple of tries but once you figure it out, easy to install and remove.

There is tiny gap around it once in place and I was concerned it would move or vibrate as I drove. None of that thankfully.
Without that little space, installing/removing this organizer would be a nightmare so it’s actually just right.

It fits my sunglasses perfectly on the left side, has plenty of room for cards or other accessories in the middle and I’ve added the rectangular EZ-Pass tag on the right for size.

Final thoughts

It looks good, it fits nicely, it doesn’t stand out and is very practical - it’s close to perfect!

The only minor issue is that the surface is so smooth that items slide in the organizer if you accelerate/brake a little hard.
Adding felt inside the 3 areas will solve the problem and be a cheap DIY fix (next weekend?).

I highly recommend this little organizer and if you can’t print it yourself (or don’t want to be bothered managing that), maybe @cottony can hook you up for a small fee too!