OBD to track Battery SOH?

[ThomasDK]

Anyone planning to follow the battery SOH with a OBD?

 

[Daniel]

Anyone planning to follow the battery SOH with a OBD?

Of course, I will transfer the one from my Taycan to my Macan 4 "OBDLINK CX Bimmercode Bluetooth 5.1 BLE OBD2 Adapter", normally in 10 days.
I hope the SOH will decrease less than my Taycan's

 

[ThomasDK]

Of course, I will transfer the one from my Taycan to my Macan 4 "OBDLINK CX Bimmercode Bluetooth 5.1 BLE OBD2 Adapter", normally in 10 days.
I hope the SOH will decrease less than my Taycan's

Will it work from day one? If i remember correct i had to choose Taycan when setting up the OBD. I had the same problem, and my Taycan was down to 88% here 4 year and 60000km later. Will turn it in tomorrow when I get my Macan. They did not ask for the SOH or see the car , so not importent to them

 

[Daniel]

85.6% 33000 km 3 years here ; but 84.96 one year ago !! with my obd and Porsche confirmed measurement .
Like you they don't care about the soh ...
The car has a few light scratches, I did not repair them due to the disastrous trade-in prices.
The Macan EV is not yet in the list to configure car scanner app ; you will share your experience with us

 

[ThomasDK]

I Can not read the SOH on my macan. I Can not Even find the obd like I used to on my Taycan. Are there any luck from snottet member of this group?

 

[tmrqs]

I Can not read the SOH on my macan. I Can not Even find the obd like I used to on my Taycan. Are there any luck from snottet member of this group?

What do you mean you can’t find the OBD? The port itself is missing?

 

[Daniel]

What do you mean you can’t find the OBD? The port itself is missing?

The port exist , but the OBD (at least mine OBD CX link) is ignored by the apps OBD link , E Flow and CarScanner.

Macan ev , and generally the setting for the PPE platform cars is not yet done.

I' ve send a message to Carscanner designer .

The designer of the E Flow app is following this forum and sure is working on this update ...

 

[ThomasDK]

The port exist , but the OBD (at least mine OBD CX link) is ignored by the apps OBD link , E Flow and CarScanner.

Macan ev , and generally the setting for the PPE platform cars is not yet done.

I' ve send a message to Carscanner designer .

The designer of the E Flow app is following this forum and sure is working on this update ...

Exactly my point. Hope they will add the Macan, but strange the car uses something completely different than the Taycan